Kit sales and production has ended. Here is a listing of instructions for the kits Dynasoar Rocketry produced for those of you that purchased kits. In some cases I made changes to the way the kits are assembled to make construction and/or fabrication easier, in those cases I made a change to the name of the kit so that the instructions are particular to each kit name. In some cases the changes are externally obvious, in some cases not. Your Paypal receipt from when you purchased the kit should have the correct name of the specific kit, inside kits made in the last 5 years will be a sheet with the correct link to the kit instructions. Click on the kit name and it will link to the instructions for that kit.
Super Sonic Transport 24mm Kit
F-14 Tomcat BT-60 Kit Instructions
Aurora Clipper 1.6″ diameter 24mm kit
Starclipper 1.6″ diameter 24mm kit(Available only through erockets)
Shuttle/Buran/Moonraker kit(OOP)
Aurora Clipper Mini (18mm motor kit)
Estes Interceptor kit #1250 18mm Conversion Short Kit
Avro Arrow 2.6″ tube kit Instructions
Avro Arrow 2″ tube kit Instructions
Bomarc (hinged rear controls not full flying)
Classic Orbital Shuttle(with low mounted dihedral wing and servos on the top of the wing)
Hypersonic III(mid mounted wing version of hypersonic with Interceptor nose cone)
Ikarus(bt-80 based, our first tube based kit)
Interceptor X(slight update to motor mounting with X form system)
Iron Cross Mk III(updated with low mounted wing with dihedral)
Iron Cross Mini (18mm motor kit)
Orbital Transporter Mini (18mm motor kit)
Pegasus XL(Orbital Pegasus with angled down rear fins with hinged elevons)
Star Clipper Mini (18mm motor kit)
Iron Cross Mk II(easier assembly than first version)
Lifting body HL-10 with 6mm depron parts
Lifting body X-24 with 6mm depron parts
Lifting body x-20 with 6mm depron parts
X-15 4″ 1/14 scale Tube Based Kit
Mach 2(styled after the Centuri Mach 10)
Orbitial Shuttle 1st run(mid mounted wing)
Orbital Shuttle 2nd and 3rd run(update to motor mounting system)
Pegasus X(orbital Pegasus with single piece top mounted wing with hinged elevon controls)
Spyplane(profile version of SR-71)
Stratodart 2(second version with normal nose cone)
Stratodart X(final version with update motor mount system(no centering rings)
X-15 updated with 9mm depron parts
Xplane(profile kit styled after the X-15 with 6mm depron parts)
Delta Dart(Tube based model of F-106)
Orbital Pegasus(styled after original Orbital Pegasus with mid mounted full flying tail surfaces)
Delta X-15(bt-80 based version of Ikarus with X-15-delta configuration wing/wingtips)
Interceptor 1st production kit with full flying tail
Upscale Aurora Clipper Short Kit
Aurora Clipper 1.6″ diameter 18mm kit
Starclipper 1.6″ diameter 24mm kit
